How to Reset DirecTV Remote: A Step-by-Step Guide

If you’re having trouble with your DirecTV remote, such as if it’s not responding, changing channels slowly, or draining batteries quickly, a reset may be the solution. Resetting your remote will restore it to its factory default settings, which can often fix minor problems.

There are two ways to reset a DirecTV remote: using the remote itself or using the DirecTV receiver.

Reset a DirecTV Remote Using the Remote

To reset a DirecTV remote using the remote itself, follow these steps:

1. Press and hold the Mute and Select buttons at the same time until the remote’s light flashes twice.

2. Enter the number 981 on the remote keypad.

3. Press the Select button again.

4. The remote’s light will flash four times, indicating that the reset is complete.

Reset a DirecTV Remote Using the Receiver

To reset a DirecTV remote using the receiver, follow these steps:

1. Locate the red reset button on the side of the receiver or inside the access card door.

2. Press and hold the reset button for 10-15 seconds, or until the receiver restarts.

3. Once the receiver has restarted, release the reset button.

4. The remote is now reset and should be paired with the receiver automatically.

If the remote is not paired with the receiver automatically, you can pair it manually using the following steps:

1. Press the Select button and the Info button at the same time until the remote’s light flashes twice.

2. Enter the number 960 on the remote keypad.

3. Press the Select button again.

4. The remote’s light will flash four times, indicating that it is paired with the receiver.

Troubleshooting Tips

If you’re still having trouble with your DirecTV remote after resetting it, try the following troubleshooting tips:

• Make sure that the remote has fresh batteries.

• Try pairing the remote with the receiver manually.

• Check the receiver for any loose cables or connections.

• Restart the receiver.

• Contact DirecTV customer support for further assistance.

Conclusion

Resetting your DirecTV remote is a simple and effective way to fix minor problems. If you’re having trouble with your remote, be sure to try resetting it before contacting customer support.

Additional Tips

• If you have a universal remote, you may need to program it to work with your DirecTV receiver. For instructions on how to program your universal remote, consult your remote’s owner’s manual.

• If you’re using a DirecTV Genie remote, you can also reset it using the Genie remote app. To do this, open the app and tap on the Settings tab. Then, tap on Remote and Reset Remote.

I hope this guide has been helpful. If you have any questions, please feel free to leave a comment below.